RE-STORE C

Powder Coating Cleaner & Oxidation Remover

Re-Store C is an advanced, European-approved liquid emulsion cleaner specially formulated to safely dissolve embedded grease, atmospheric pollutants, and unsightly chalking/oxidation from powder-coated and anodised aluminium surfaces without scratching or damaging delicate factory finishes.

Removes Stubborn Oxidation: Chemically lifts white chalking and restores original color saturation.
100% Non-Abrasive: Unlike household scouring cleaners, it will not scratch, strip, or dull your aluminium coating.
Essential Surface Preparation: Prepares the surface for optimal bonding before applying Re-Store P UV protection.
Ideal for Coastal & High-Sun Areas: Trusted across South Africa to reverse the harsh effects of salt air and intense UV exposure.

Find a Distributor Order via WhatsApp Request Quote

European Approved

Surface-Safe Guarantee

Nationwide Stockists

Target Surfaces

Powder-Coated & Anodised

Formula Type

Non-Abrasive Emulsion

Application Tool

Damp Cloth or Sponge

Recommended Follow-up

Seal with Re-Store P

Application Guide

How to Use RE-STORE C

Follow these 9 easy steps for optimal, showroom-grade results.

Rinse Loose Grit: Using clean water, spray or wipe the aluminium powder coating to remove any loose abrasive dust and grit.

Apply Cleaner: Pour a generous amount of Re-Store C onto a clean, damp or wet cloth (a dish cloth or textured microfiber cloth works best).

Circular Agitation: Wash the surface in firm circular motions until the surface grime lifts and the emulsion covers the area.

Target Chalking & Oxidation: Visible oxidation (white powdering) will require slightly more rubbing pressure to break down and lift.

Keep Cloth Moist: Always keep the cleaning cloth wet with a sufficient amount of cleaner active on the fabric.

Inspect Cleanliness: Take a fresh, clean section of your cloth and firmly rub a small portion of the cleaned area.

Repeat If Necessary: If visible dirt or chalking transfers onto the clean cloth, repeat the washing process on that section.

RINSE THOROUGHLY: Rinse the aluminium very well with clean water to remove all emulsion residue, and allow to dry properly.

Lock in Protection: Once dry, apply Re-Store P to protect the surface against UV radiation and prolong the life of the product.

Professional Tip: Regular maintenance with Re-Store C every 6 months (or every 3 months in coastal areas) prevents salt and chemical attacks that cause permanent pitting, saving property owners thousands in frame replacements.

The Complete 2-Step System

Step 2: Seal and Shield with RE-STORE P

Cleaning removes chalking, but protection prevents it from returning. Apply Re-Store P right after cleaning to form an invisible UV shield and preserve the vibrant luster.

Explore Re-Store P

Got Questions?

Frequently Asked Questions

No. Unlike common household cream cleaners that contain harsh micro-abrasives, Re-Store C is an engineered non-abrasive liquid emulsion. It safely dissolves oxidation and grease without scratching, stripping, or dulling powder-coated or anodised surfaces.

Yes! In fact, coastal properties are where Re-Store C shines brightest. Airborne sea salts cause rapid chalking and corrosion. Re-Store C dissolves stubborn salt buildup and oxidation, bringing dull frames back to their original factory sheen.

A single 500ml bottle is typically sufficient to clean all the window frames and sliding doors of a standard 3–4 bedroom home. For large commercial installations or multi-story buildings, 5-liter commercial containers are available through our distributor network.

Re-Store C is stocked nationwide through authorized architectural distributors, including Conways, Sheerline, and GDPS branches across Gauteng, KZN, Western Cape, and Eastern Cape. You can also order directly via our WhatsApp line or Contact page.

Ready to Revitalize Your Aluminium?

Find an official distributor near you or talk directly to our technical sales team for recommendations.

Find a Distributor Contact Our Team